How to install the Passiv Smart Thermostat with an Ebac heat pump

To install the Passiv Smart Thermostat with Ebac heat pumps, for either 1 or 2 zones with wired or wireless Thermostats, follow the steps below. 

1. Check compatibility
   View all compatible Ebac heat pumps at Ebac supported heat pumps.
2. Follow the Installation Guide
   This is included in the box, or you can download a digital version of the Passiv Smart Thermostat Installation Guide.
3. Connect the RS485 Modbus wiring
   All necessary RS485 Modbus connections can be found in Ebac RS485 connections.
4. Check the heat pump settings
   Make sure that all settings on the Ebac indoor controller are set to their default values.
5. Commission the Passiv Smart Thermostat
   Follow the instructions on the Programmer to commission the Passiv Smart Thermostat. You can find a video guide on commissioning on our YouTube channel.

If you have followed the steps above and are having problems with the installation, follow the guidance at Ebac troubleshooting.